You will need to have the following items on hand:

(1) Drill with 1/8” bit	(1) 6’ x 1’ x .5” wood board
(1) Phillips screwdriver	(1) Artwork from website
(4) Phillips 3/16” screws	(1) Plexiglass display (included)
(1) Hole saw with 1 7/8” blade

STEP 1: Obtain VacnSeal display art from VacnSeal web site.

Notes:
· Download 17-inch display art from the following web page: http://www.vacnseal.com/art.php
· Send this file to Kinko’s or another local printer. Have them print, laminate and place a cardboard backing behind the art piece for durability.
· Cut out center area where wall plate will be mounted.

STEP 2: Drill 4 holes into wood backing.

Notes:
· Make sure that the holes drilled into the wood align with the plexiglass holes.

STEP 3: Mount plexiglass display onto wood backing using (4) screws.

Notes:
· See picture (below) for proper placement of plexiglass onto wood backing.

STEP 4: Cut circle hole into wood backing for wall plate.

Notes:
· Using a hole saw and a 1 7/8” blade, cut a circle out of the wood backing that will provide enough room from the VacnSeal unit to wall plate.
· Make sure that the circle cut is large enough for the back fixture of the wall plate to be inserted into it.

STEP 5: Mount VacnSeal unit to plexiglass.

Notes:
· Follow normal VacnSeal installation instructions from the user’s manual (http://www.vacnseal.com/files/
VacnSeal-Installation-Manual.pdf ). For the display, the plexiglass piece will serve as the under-cabinet mounting piece.
· Place artwork between the wall plate and the wood backing before wall plate is fastened.